IoT based real time Theft Prevention Management Systems (TPMS) with 4G GSM Based Automatic Controller, integrated camera and cloud and android based custom application
1. The 4G based controller connected with a) Door switch to get when Shelter door is open, b) Battery Loop, If battery loop is breaking the controller will get signal for the same, c) Battery Bank, if battery bank will disconnected or voltage below 36 volt controller will get signal, d) NO/NC / 12V input to Vibration Sensor alert, e) NO/NC / 12V input to Infrared Beam Sensor alert.
2. The TPMS integrated with small camera mounted at front of TPMS encloser (that is extended version).
3. When any of the above event happen immediately TPMS starts executing its function which causes instant capture the snapshot through the camera and push to the server and then call and SMS goes to the four pre-configured mobile numbers respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation. After the call and SMS the camera will again start taking pictures and push to the server until the user will not reset the alarm from the web or android application.
4. TPMS will also push image and data through GPRS with controller Id, event id on the cloud server for MIS reports, also view and download the images captured by the camera.
5. Web application/ Android App to new controller manage controller mobile numbers etc. (Add/Edit/Delete).
6. TPMS can be activated and deactivated and reset alarm through the android/web app or remote to enter at premises.
7. User level access, custom reports, live status of all controller.
8. Heart beat (Health of the controller can also check at web/android application) to check the health of TPMS controller, if heart beat will not come in certain time, cloud will send SMS/call to the concern person.
9. Web and android App will design with Client branding. No extra charges.
10. A part of functionality of controller to send SMS and Calling, we can make a control room, where the Alarm/Hooter amplitude (118dB) keeps ringing with LED indication on the Screen when controller input tampered.
11. Hooter can On/Off Through android/web app.
12. TPMS reboot reason also available at MIS reports.
13. TPMS Enclosure opening alert can also send through SMS/Call or display on control room screen, or on MIS android/web app.
14. Call receiving status can also available at MIS reports.
15. Battery Bank critical notification can send through SMS or display at control room screen. 16. Controller battery (2000 MAh) critical notification can send through SMS or display at control room screen.
17. Supply of 48-volt SMPS notification can also get after certain time through SMS or display at control room screen.