GSM Temperature/Humidity/CO2 Logger

Our Products – Leveraging our domain expertise and our familiarity with embedded technologies,we deliver top quality products and applications that help people from all over India.

GSM Temperature/Humidity/CO2 Logger

4G based GSM based device for Temperature, Humidity and CO2 Monitoring System data logger and SMS/Call alert system with Web/Andriod MIS Application.

  • 4G GSM module, LTE category 4 module with Temperature, Humidity and CO2, inbuilt 1100 MaH lithium battery, with display for displaying current Temperature, Humidity and CO2 values.
  • User can register up to 4 mobile number at controller to get SMS/call for any alert.
  • User can configure Temperature low & high value, Humidity low & high value and Co2 PPM low & high-level value through SMS/Web/Andriod App, so when any of the value increased or decreased instantly controller starts executing its function which causes instantly call and SMS goes to the four pre configured mobile numbers respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation.
  • Call and SMS if wire of sensors disconnected from controller.
  • In case of CO2 increased from configured high level value, then 3 amp relay will on till the CO2 level will not come down at configured high level value 20% reduction.
  • example: let configured high level value 20000 ppm and low-level value 12000 ppm, if CO2 value will 20001 relay will on till then co2 value will not down and equal to 16000 ppm.
  • Controller will push current value of Temperature, Humidity and CO2 at cloud every 2 minutes interval to check the report at CMS application.
  • Rest button to restart device.
  • GSM Signal Strength, configured Temperature, Humidity and CO2 current high Low will display , 4 line display module will integrate.
Features:
  • 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage
  • Micro controller based Industrial Grade GSM module.
  • 3-4 Amp relay to operate Industrial Exhaust Fans in case of CO2 increased from configured high level value.
  • Display on Device box for current Temperature, Humidity and CO2 Level.
  • Inbuilt Lithium-Ion Rechargeable battery backup up to 12 Hours.
  • 2 relay output for NO/NC
  • 12 Volt AC/DC Adapter cum Charger.
  • GSM 3DBI Magnetic Mount Spring Antenna – 3m Cable. MHz Antenna : 900/1800/1900 MHz
  • Enclosure Box 201X121X80 mm (IP 65, ABS, white color).
  • Quick response time.
  • Fully customised solution
  • In House R&D and Production.
  • Purely Make in India Product.