Categories
Projects

IoT based Transformer Handling

4G GSM Transformer, Temperature and Oil Level Monitoring System

4G GSM Transformer, Temperature and Oil Level Monitoring System

4G GSM Transformer, Temperature and Oil Level Monitoring System with web and android applications.

How it works:

1. 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage, Temperature sensor with display for displaying current Temperature and Transformer Oil level.
2. User can register up to 4 mobile number at controller to get SMS/call for any alert.
3. User can configure Temperature low & high value and and Transformer Oil level low & high value through SMS/Web/Andriod App, so when any of the value increased or decreased instantly controller starts executing its function which causes instantly call and SMS goes to the four pre-configured mobile numbers
respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation.
4. Controller will push current value of Temperature and transformer Oil Level Status at cloud every 10 minutes interval to check the report at CMS application.

Categories
Projects

IoT based Industrial Oven Handling

IoT based Industrial Oven Monitoring & Handling

IoT based Industrial Oven Monitoring & Handling

Smart GSM 4G LTE/WiFi based device for Temperature Monitoring and Remote Handling to ON/Off the Oven at different places with web and android applications.

How it works:

1. 2.4 GHz Wi-Fi (802.11 b/g/n, supporting WPA/WPA2) module, Temperature sensor with display for displaying current Temperature and Oven Status ( On/Off) (WiFi Model).
2. 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage , Temperature sensor with display for displaying current Temperature and Oven Status ( On/Off) (GSM 4G Model).
3. Controller will push current value of Temperature and Oven On/Off Status at cloud every 10 minutes interval to check the report at CMS application.
4. User can On/Off Oven through CMS .

Features:

• 2.4 GHz Wi-Fi (802.11 b/g/n, supporting WPA/WPA2) for IoT applications (WiFi Model).
• 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage (GSM 4G Model).
• Inbuilt Digital Temperature Sensor
o Temperature accuracy: typical ± 0.3 ° C
o Temperature resolution: Typical 0.01 °C
o Working temperature: 0°C to 350°C
• Display on Device box for current Temperature and Oven Status.
• 12 Volt AC/DC Adapter.
• Enclosure Box 200X120X80 mm (IP 65, ABS, white).
• GSM 3DBI Magnetic Mount Spring Antenna – 3m Cable. MHz Antenna: 900/1800/1900 MHz.

Categories
Projects

Multiple Inputs Alerts and Monitoring System

Multiple Inputs Alerts and Monitoring System

Multiple Inputs Alerts and Monitoring System

Smart GSM 4G IoT Real Time Multiple Alerts and Monitoring System with cloud and android based custom application

How it works:

1. The 4G based controller connected with eight 48 volt input No/Nc and name of the each input can configure through web/android application.
2. When any of the above event happen immediately our Controller starts executing its function which causes instantly call and SMS goes to the four pre-configured mobile numbers respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation.
3. Controller will also push data through GPRS with controller Id, event id(the input number that trigger) with Latitude , Longitude on the static IP cloud server for MIS, at Central Control Room MIS Screen will display the Controller details with Controller No, Event Details, Cloud can also make call and send SMS at four (can be add more) pre-configured mobile numbers respectively.
4. Static IP based web application/ Android App to add new controller, manage controllers and mobile numbers etc. (Add/Edit/Delete).
5. User level access, custom reports, live status of all controller.
6. A part of functionality of controller to send SMS and Calling, we can make a control room, where the Alarm/Hooter amplitude (118dB) keeps ringing with LED indication on the Screen when controller any of the input tampered.
7. Controller reboot reason also available at MIS reports.
8. Call receiving status can also available at MIS reports.
9. Controller battery (2000 MAh) critical notification can send through SMS or display at control room screen.

Categories
Projects

Smart Water Level Monitoring & Handling

Smart Water Level Monitoring & Handling System

Smart Water Level Monitoring & Handling System

IoT based real time Smart Water Tank Level Monitoring And Handling Systems with 4G GSM Based Automatic Controller
WIFI/GSM 4G based devices to count the productions of any production unit and send the real-time data at cloud server.

How it works:

1. The 4G based controller connected with pump controller and get the level of the water tank from water level sensors, if the water tank is empty automatically motor pump will start till the water tank is not full, once the water tank is full the motor pump will stop.
2. Controller will push current pump on/off status and water level ( Full, Half, Empty) of the water Tank at cloud every 2 minutes interval to check the report at CMS application with Controller Number and Time and Date of log. User can re configure interval timing to push the data on cloud.
3. User Can also ON/Off flow of any Motor Pump from the MIS Application( Web or Android) , if Off from MIS , Motor will not start until user will On form MIS application.
4. Static IP based web application to configure device with Controller ID, Motor Pump ID, Motor Pump etc. (Add/Edit/Delete).
5. Custom Report for Pump On Duration, Tank water level, as daily, weekly and monthly basis summary of total flow with graphical representation.
6. Can also calculate water flow , current consumed, dry motor run status , as daily, weekly and monthly basis summary of total flow with graphical representation,.
7. User can register up to 4 mobile number at MIS to get SMS of water tank level and On/Off Status.

Categories
Projects

IoT-based Production Output Monitoring

IoT-based Production Output Monitoring System

IoT-based Production Output Monitoring System

IoT based real time production report system with three inputs buttons for the alert ( Break Down, Tools Change & No Man)
WIFI/GSM 4G based devices to count the productions of any production unit and send the real-time data at cloud server.
Four Button available on the controller; Break Down, Tools Change , No Man alert and Reset button ,User can pressed any of the button from the controller if any event happen, Reset button available to reset from any event

How it works:

The WIFI based device will get pulse count of the production items from sensor and push the data log after every minute (can be changed as per requirement) at cloud as production Machine id, production count and real time stamp. also send the current status of Break Down, Tools Change , No Man Buttons.
Cloud an also make call and send SMS at four pre-configured mobile numbers respectively if break down or No Man alert button pressed. Mobile number can configured or edited from the web application.

Categories
Projects

GSM 4G/GPS ELock for Fuel Tank

GSM 4G/GPS ELock for Fuel Tank

GSM 4G/GPS ELock for Fuel Tank

IoT based real time Smart GSM 4G/GPS ELock for Fuel Tank with Geofencing Handling System

How it works:

1. The 4G based controller connected with E-Lock Panel to open the Fuel tank with 2 level of authentication.
2. First level: user Can open and close the fuel tank E-lock Panel through the cloud-based web application or android application.
3. Second level: Geofence, the fuel tank E-lock Panel will open if the controller is inside the geofence, latitude and longitude will configure through the android app or web application, this option can be enabled or disable through the application.
4. Static IP based web application/ Android App to configure controller and vehicle details etc. (Add/Edit/Delete).
5. User level access, custom reports, live status of all E-Lock Panel controller.

Categories
Projects

IoT based Mobile Tower Security

IoT based Mobile Tower Security (TPMS)

IoT based Mobile Tower Security (TPMS)

IoT based real time Theft Prevention Management Systems (TPMS) with 4G GSM Based Automatic Controller, integrated camera and cloud and android based custom application

How it works:

1. The 4G based controller connected with a) Door switch to get when Shelter door is open, b) Battery Loop, If battery loop is breaking the controller will get signal for the same, c) Battery Bank, if battery bank will disconnected or voltage below 36 volt controller will get signal, d) NO/NC / 12V input to Vibration Sensor alert, e) NO/NC / 12V input to Infrared Beam Sensor alert.
2. The TPMS integrated with small camera mounted at front of TPMS encloser (that is extended version).
3. When any of the above event happen immediately TPMS starts executing its function which causes instant capture the snapshot through the camera and push to the server and then call and SMS goes to the four pre-configured mobile numbers respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation. After the call and SMS the camera will again start taking pictures and push to the server until the user will not reset the alarm from the web or android application.
4. TPMS will also push image and data through GPRS with controller Id, event id on the cloud server for MIS reports, also view and download the images captured by the camera.
5. Web application/ Android App to new controller manage controller mobile numbers etc. (Add/Edit/Delete).
6. TPMS can be activated and deactivated and reset alarm through the android/web app or remote to enter at premises.
7. User level access, custom reports, live status of all controller.
8. Heart beat (Health of the controller can also check at web/android application) to check the health of TPMS controller, if heart beat will not come in certain time, cloud will send SMS/call to the concern person.
9. Web and android App will design with Client branding. No extra charges.
10. A part of functionality of controller to send SMS and Calling, we can make a control room, where the Alarm/Hooter amplitude (118dB) keeps ringing with LED indication on the Screen when controller input tampered.
11. Hooter can On/Off Through android/web app.
12. TPMS reboot reason also available at MIS reports.
13. TPMS Enclosure opening alert can also send through SMS/Call or display on control room screen, or on MIS android/web app.
14. Call receiving status can also available at MIS reports.
15. Battery Bank critical notification can send through SMS or display at control room screen. 16. Controller battery (2000 MAh) critical notification can send through SMS or display at control room screen.
17. Supply of 48-volt SMPS notification can also get after certain time through SMS or display at control room screen.

Categories
Projects

IoT based real time Smart Digital Water Flow

IoT based real time Smart Digital Water Flow Meter with Telemetry for Groundwater extraction monitoring

IoT based real time Smart Digital Water Flow Meter with Telemetry for Groundwater extraction monitoring

IoT based real time Smart Digital Water Flow Meter with Telemetry for Groundwater extraction monitoring with 4G GSM Based Automatic Controller
We are introducing standalone customize system (4G GSM based devices) to get following data from digital water flow meter through serial communication.

  • Timestamp (Calculate at Controller when data get from flow meter through serial communcation)
  • Cumulative forward flow volume (get from digital water flow meter through serial communication)
  • Cumulative reverse flow volume (get from digital water flow meter through serial communication)
  • Cumulative Net volume (get from digital water flow meter through serial communication)
  • Cumulative Pump working hours (Calculate at Controller)
  • Meter serial number (Configure at Controller)
  • Device last calibration date (Calculate at Controller)
  • Borewell id (Provided By CGWA) (Configure at Controller)
Categories
Projects

Smart Boundry Wall Security with Twin Beam Sensor

Smart Boundry Wall Security with Twin Beam Sensor

Smart Boundry Wall Security with Twin Beam Sensor


4G based GSM based device with Double Beam Security Active IR Infrared Detector with Beam Alignment Sensor to secure Boundary wall called ” GSM SMART GUARD (24X7) with Twin Beam Sensor ” . with following features

  • 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage.
  • Micro controller-based system with QUECTEL Industrial Grade GSM module.
  • Beam Sensor Detector pair: No. of Beams- 2, Distance between beams- The Beams can be mounted up to 100 meters apart
  • Beam Sensor time adjustment for pass blocking (have influence on detection sensitivity- User selectable digital processing programmable time
  • Beam Sensor alarm Output – YES –Contact NO/NC Type
  • WORKING VOLTAGE – DC 10.5-30V DC, Working temperature- – 30° + 50° C
  • Easy installation and configuration.
  • 24 x 7 Security cum monitoring tool.
  • instant calling and messaging.
  • Remote to activate and deactivate Controller.
  • Industrial grade siren.
  • Easy to reconfigure and manage through registered numbers.
  • Quick response time.

How GSM SMART GUARD (24X7) with Twin Beam Sensor work.

When any intruder tries to enter in the Boundary wall area the twin beam sensor detect motion and then immediately GSM Smart Guard starts executing its function which causes instant siren will play at the spot at high amplitude (110dB) and then instantly call and SMS goes to the four pre-configured mobile numbers respectively. The Device will keep on calling on all the four numbers stored one by one till any one number picks the phone to acknowledge that he has got the message for emergency situation. GSM Smart Guard can be locked and unlock through the SMS and remote.

Categories
Projects

GSM 4G Controller with Smoke & Motion

Security and Saftey of Real Estate Society

GSM 4G Controller with Smoke & Motion
4G based GSM based device with 10 PIR Motion Sensor , 10 Smoke to secure organisation area Premises is called ” 4G GSM SMART GUARD (24X7) . with following features

  • 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage or QUECTEL Industrial Grade GSM module for 2G.
  • Micro controller-based system with QUECTEL Industrial Grade GSM module.
  • Easy installation and configuration.
  • 24 x 7 Security cum monitoring tool.
  • Panic Button facility for emergency- instant calling and messaging.
  • Motion sensor, with activate and deactivate through SMS or Remote.
  • Smoke sensor always activated.
  • Remote to activate and deactivate. siren can also stop from that
  • Industrial grade siren with every controller.
  • Easy to reconfigure and manage through registered numbers.
  • Quick response time.